TKO Flag Bott-The Ultimate Off-Road Flag & Whip Solution

TKO Flag Bott Kit

Protect those expensive flags and lighted whips with the TKO Flag Bott.

It will raise or lower your flags and lighted whips with the flip of a switch. The Flag Bott mounts to your roll bar and holds your flag or lighted whip at the angle you desire and will lower it out of the way at your command to drive under low objects like trees or when loading your buggy into your enclosed trailer or garage without the need to remove the flag or whip. Use two Flag Botts to hold a pair of flags or whips and control them with one switch.

Designed for Demanding Conditions

The TKO Flag Bott is built tough. Except for the gaskets and hole plugs all parts are metal. No drive or exterior parts are plastic. Our buggy has rolled over twice, rock crawling and our whips never broke. Even in a roll over event or you run into a low branch or your trailer door at slow speed the  Bott is designed to allow the flags or whips to rotate down and not break.

Designed by a retired government laboratory engineer with 40 years experience and a crack team of machinists that have over 50 years of experience.

Everything you need is included in the kit.

Kit Includes

• (1) Motorized TKO Flag Bott assembly
• Mounting hardware
• Fasteners
• Control switch
• Written installation instructions
• Installation, adjusting and tuning videos available online

Options include flat panel or round mounts for roll bars ranging from 3/4” to 3 3/4”

A Wide Range of Industries and Applications

The TKO Flag Bott™ provides a fast, convenient way to raise and lower a flag with the flip of a switch—right from the driver’s seat. Originally designed to simplify flag operation, it has proven valuable across a wide variety of industries where safe, efficient, and reliable flag deployment is essential.

Common applications include:

• Ski boats in states where a skier-down flag is required
• Warehouse forklifts and other industrial vehicles
• Oversized and over-dimensional freight transport
• Mining equipment
• Agricultural equipment operating on public roads
• Construction vehicles
• Logging trucks
• Airport ground support vehicles
• Industrial facilities using whip flags at blind intersections
• RV’s or Sprinter Vans with StarLink or Cell Phone Antennas
• And many other specialized commercial and industrial applications

Whether your operation requires improved safety, regulatory compliance, or simply greater convenience, the TKO Flag Bott helps operators deploy and retract flags quickly without leaving the vehicle.

Specifications

• The actuators will push 235 lbs. and will pull 210 lbs.
• The box is 4” wide x 9.5” long x 2” thick
• Approximately 5 lbs with mounts and clamps attached
• All machined parts are solid 6061 aluminum and bolts and screws are stainless
• The mounting hardware will fit any of our TKO fasteners. We have fasteners that range from 3/4” to 3 1/4” in diameter. We also have a mount that can attach to a flat surface. Our fasteners can fit metal to metal or can use a rubber liner.
• The fasteners can install 360 degrees on a bar and the mounting hardware can rotate 360 degrees to fit any angle you desire.
• The mounting puck on the back of the box can be mounted towards the top of the box, the middle or the bottom of the box for customization.
• The flag/whip attach point has 4 set screws. By loosening them, the circle can be rotated 360 degrees. Once your desired angle or tilt is achieved, tightening the set screws will lock in the angle.
• Comes standard in Silver Aluminum color

Custom anodized colors available for $25 and could take up to a month. Contact us at (307) 733-3063

Short Introduction Video

INSTRUCTIONAL VIDEOS

Starting the installation

Adjusting the Flag Bott Height (optional)

Mount the Flag Bott to the Mounting Plate

Starting the Wiring Installation

Tuning and Setup part A

Tuning and Setup part B

Setting proper flag/whip angle and hub set screw tension

Check out our other popular products.

Roll Bar Accessory Mounts

Mighty Mount Electronics Holder

GoPro Mount

Adjustable Flag and Whip Mounts

Fuel Tank Kits

All TKO products are Made in America

International Shipping

Questions?

If you have any questions not covered here send us an email or call us at (307) 733-3063. Contact Us