Shop

Bushing kits - sxs accessories
715 WILDCAT RIDERS
August 2, 2020
FireAde Extinguisher - custom hose clamps
FireAde Enforcer Extinguisher
April 6, 2021

Roll Bar Accessory Mounts

$22.50$29.00

Roll bar Accessory Mounts (adjustable clamp) are built to fit roll bars and luggage racks with OD of .75” to 2.5”. We can also accommodate those roll bars with less common sizes, for example  the 1.85” on the Can-Am. Select from silver* or black. Available with your choice of security or quick release latches. Roll Bar Accessory Mounts from TKO Clamping Systems attach almost anything to your roll bar or luggage rack. Therefore you can put that GPS where you can see it. Mount your phone within easy reach. Take those things rolling around in your back end and hang them up out of the way on your roll bar for easy access. Great for your Razor, UTV, Jeep or anything with a roll bar.

For hose clamps see our Premium Adjustable Clamps and our Custom Hose Clamps.

Outer Dimensions of the Roll Bar

Roll Bar Accessory Mounts

Roll Bar Accessory Mounts (adjustable clamps) or Roll Bar Anchor Mounts from TKO are built to fit roll bars and luggage racks with OD of .75” to 2.5”. We can also accommodate those roll bars with less common sizes, for example  the 1.85” on the Can-Am. Our new smaller size 3/4” clamp may be exactly what you need for that handle bar, luggage rack, bicycle, boat or motorcycle. Select from silver satin machined or black finishes. Available with your choice of security or easy release latches.

Each clamp comes with two rubber liners in 1/16” and 1/8” so each clamp can fit three different sizes of roll bar or luggage rack.

Attach Almost Anything

Roll Bar Accessory Mounts from TKO Clamping Systems allow you to attach almost anything to your roll bar. So you can take those things rolling around in your back end and hang them up out of the way on your roll bar for easy access. For instance you can put that GPS where you can see it. Mount your phone within easy reach.  Most importantly mount that Fire Extinguisher where it needs to be for easy access when needed. Great for your Razor, UTV, Jeep or anything with a roll bar or luggage rack. Our Roll Bar Accessory mounts (Roll Bar Anchor Mounts) will not mar your roll bar and do not require any drilling. Therefore you won’t void your warranty.

No Special Tools Required

No specialty tools are required to remove and quickly reinstall your accessory. A standard Phillips screw driver is all that is needed to install and in some cases an Allen wrench is used to attach your accessory to the clamp.

 

Redesigned Easy Release Clamps

Our redesigned Easy Release Clamp can now be reinstalled with no tools. After you have properly installed your clamp and need to remove if from the roll bar, it can be reinstalled by simply hooking the the corner of the release in the rectangular hole and pulling it tight over center. We recommend using a screwdriver if available just to make sure everything is still tight to your preference but it’s not required.

Reinstall video.

 

Custom Engraving 

TKO offers custom engraving. Please contact us for details.

Accessory Mount Sizing

Clamp #     Sizes

0          Fits 1” metal to metal. Using included liners 7/8” and 3/4” bars. Easy Release version fits       7/8” and 3/4” bars

1         Fits 1 1/4” metal to metal. Using included liners 1 1/8” and 1” bars. Easy Release version fits 1 1/8” and 1” bars

2         Fits 1 1/2”  metal to metal. Using included liners 1 3/8” and 1 1/4” bars. Easy Release version fits 1 3/8” and 1 1/4” bars

3          Fits 1 3/4” metal to metal. Using included liners 1 5/8” and 1 1/2” bars. Easy Release version fits 1 5/8” and 1 1/2” bars

4          Fits 2” metal to metal. Using included liners 1 7/8” and 1 3/4” bars. Easy Release version fits 1 7/8” and 1 3/4” bars

5          Fits 2 1/4” metal to metal. Using included liners 2 1/8” and 2” bars. Easy Release version fits 2 1/8” and 2” bars

6           Fits 2 1/2” metal to metal. Using included liners 2 3/8” and 2 1/4” bars. Easy Release version fits 2 3/8” and 2 1/4” bars

The lug is 3/8” long and can be shortened to 1/4” by simply cutting it if needed.

Made in America

We make all of our TKO Clamping Systems Accessory Mounts in house at our Pocatello, Idaho shop right here in the USA.

For hose clamps see our Premium Adjustable Clamps and our Custom Hose Clamps.

* The color “silver” is a satin machined aluminum.

International Shipping

For international shipping orders please contact us with your address so we can get you an accurate shipping cost to your destination. (307) 733-3063 or email us.

Questions?

If you have any questions not covered here send us an email or call us at (307) 733-3063. Contact Us

 

Clamp Number

, , , , , ,

Latch Style

Quick Release, Security

Color

,

Reviews

There are no reviews yet.

Be the first to review “Roll Bar Accessory Mounts”