Off Road Vehicle Hose Clamps

TKO Clamping Systems Will Be At SEMA 2017 in Las Vegas, NV
October 2, 2017
clamps3 - hose clamp
Why Should I Buy TKO Clamping Systems’ Hose Clamps?
February 13, 2018

Customizable Engine Bling

Off Road Vehicle Hose ClampsThe technology of off-road vehicle hose clamps has remained relatively static throughout the years. That is until TKO Clamps entered the market. We improved upon clamping technology, a realm that has seen very little innovation. With our customizable engine bling, you get the kind of off-road vehicle hose clamps that perfectly complement your vehicle with custom engravings, including images and text! We offer many different anodized colors and include a polished finish.

Our vehicle hose clamps make your vehicle stand out. They are all made to fit your size requirements and specifications. These custom clamps are not only unique, stylish, and customizable, they also fit and work better than typical hose clamps. Traditional clamps are often cheaply made, aesthetically unappealing, and hard to use. The clamping technology get from us, however, is:

  • High quality
  • Precise
  • TWill turn your vehicle into something personal and artistic

From the very beginning, we set out to provide clamps that are both aesthetically appealing and technologically progressive.

Off Road Vehicle Hose ClampsA product that looks this good should also be resilient to maintain its appearance. That’s exactly what our off-road vehicle hose clamps are. Our premium hose clamps are revolutionary in their design. They consist of a multi-hinged 3 part aluminum band, incorporating a negative angle locking latch system. Our clamps have been machined individually from a solid piece of powerful 6061-T6 aluminum. This is the same kind of material you will often find on aircrafts, as it is so high-strength and durable. At about a quarter inch in thickness and a half-inch in width, our clamps have been praised for their durability. Some might say that our hose clamps are even overbuilt for the kind of pressures required in vehicle hoses. But we wouldn’t have it any other way. Our clamps are guaranteed to get the job done.

Get Your Off-Road Vehicle Hose Clamps

To get one of these pieces of engine bling on your vehicle, all you have to do is take the right measurements and tell us what kind of engraving you desire. Using a micrometer, measure the width and height of the hose, preferably at the same area of the hose in which you plan to install your new custom clamp. You will want the micrometer to fit perfectly on the hose, but be sure not to pinch it, as this will result in an inaccurate measurement. Once you have the width and height measured and recorded, all you have to do is determine what kind of engraving you want (including font and clip art), and then give this information to us. We will take care of the rest.

If you have any questions regarding the measurement process, take a closer look at our measurement guide.

TKO Clamps is proud to be on the cutting-edge of clamping technology. We’ve closed the technological gap in vehicle hose clamps with products that are both good-looking and highly functional. If you want to take your vehicle to the next level, contact us today.

Comments are closed.