Best Roll Bar Grab Handles for Side by Sides in 2026

Your passenger just grabbed a canvas strap, and it ripped. That moment is why the grab handle on your side-by-side actually matters. The best roll bar grab handles for side by sides in 2026 are solid, secure, and bolt on without drilling. The TKO Clamping Systems Roll Bar Mounted Grab Handle tops the list for exactly those reasons.

Below, we break down the top options on the market and explain what separates the great ones from the ones that will let you down on the trail.

Why Your Grab Handle Matters More Than You Think

Most riders add a grab handle as an afterthought. It often comes stock on the machine, flimsy and forgettable. But when a passenger needs it, they really need it. Rough terrain, hard turns, and unexpected drops all put stress on that handle and the person holding it.

A bad grab handle does not just feel cheap. It can fail. A solid, properly mounted handle keeps your passengers confident and safe.

What to Look For in a Roll Bar Grab Handle

Not all grab handles are built the same. Here is what to look for before you buy.

Material

• Aluminum beats plastic and fabric every time for durability and grip
• 6061 T6 aircraft aluminum is the gold standard for off-road accessories
• Canvas and paracord straps stretch, fray, and eventually fail

Mounting Method

• No-drill clamp mounts preserve the integrity of your roll bar
• Drilled mounts create weak points and can void warranties
• Clamp-based systems let you reposition the handle without any damage

Fit and Adjustability

• Look for handles that fit common roll bar diameters: 1.5 inches to 2 inches.
• Adjustable placement means every passenger can reach it comfortably

The Best Roll Bar Grab Handles for Side by Sides in 2026

1. TKO Clamping Systems Roll Bar Mounted Grab Handle (Best Overall)

This is our flagship grab handle, and we built it because we were tired of seeing flimsy options on the market. The TKO Roll Bar Mounted Grab Handle is machined from solid 6061 T6 aircraft aluminum. It features a knurled surface for a real grip even with gloves on.

The handle measures 5.5 inches long and 1 inch in diameter. It mounts using two TKO Hinged HD clamps and four rubber liners. No drilling required. It fits roll bars from 1.5 inches to 2 inches in diameter.

You can position it exactly where your passenger needs it. Move it. Adjust it. Reposition it for different riders or different machines. No new holes, no permanent damage.

Everything is Made in America. Our clamps have won 4 Global Media Awards at SEMA. In 2019, Wheels in Motion TV named us the SEMA Product of the Year.

Best for: Any SxS, UTV, ATV, or Jeep owner who wants the real thing.

Price: $65

2. Generic Canvas Strap Handles

These show up everywhere at a low price. They bolt or wrap onto the cage with basic hardware. The strap is usually canvas or nylon webbing.

The problem is simple. They stretch under load. They fray over time. They offer no real rigidity when a passenger needs to pull themselves in or brace for impact.

Best for: Light use where safety is not a priority.

3. Paracord Grab Handles

Paracord handles are popular in the DIY community. They look cool and can be customized with different colors. However, paracord is not designed to bear the repeated stress of off-road use.

Over time, the cord loosens. Knots can slip. A paracord handle simply does not give the same confidence as a solid aluminum one.

Best for: Light trail riding with experienced adult passengers.

4. Plastic Injection-Molded Grab Handles

These often come standard on entry-level UTVs. They are lightweight and inexpensive to manufacture. But plastic cracks, especially in cold weather. UV exposure degrades it further over time.

If your machine came with a plastic handle, it is worth upgrading. The cost difference is minimal compared to the confidence you gain.

Best for: Casual use as a temporary solution.

Why the TKO Grab Handle Wins on Material Quality and No-Drill Install

Solid 6061 T6 aircraft aluminum is not a marketing claim. It is the same grade of aluminum used in aircraft structural components. According to the ASM Aerospace Specification Metals database, 6061-T6 aluminum delivers an ultimate tensile strength of approximately 45,000 psi. That is serious material for a serious application.

The no-drill mounting system matters just as much as the material. Drilling through your roll bar creates a stress point. It can compromise the structural integrity of the cage. TKO’s hinged HD clamps grip the bar with serious holding power without touching your roll bar with a drill bit.

The rubber liners protect your roll bar finish and create a firm, rattle-free fit. The clamp locks tight and stays tight.

You also get flexibility. Slide the handle to any position on the bar. Move it for a taller passenger. Move it again for the kids in the back. No tools needed for repositioning.

Ready to Upgrade Your Grab Handle?

Stop relying on a canvas strap or a plastic handle that was never built for serious use. The TKO Roll Bar Mounted Grab Handle gives your passengers something real to hold onto.

Built from solid 6061 T6 aircraft aluminum. Machined and made in America. No drilling required. Award-winning quality at a price that makes sense.

Visit our online shop to see the full line of roll bar accessories. Need a custom solution? Contact our team, and we will help you find the right fit for your machine.

Frequently Asked Questions

What is the best material for a UTV grab handle?

Solid aluminum is the best material for a UTV grab handle. Specifically, 6061 T6 aircraft aluminum offers the best balance of strength, weight, and durability. It resists corrosion, handles repeated stress without deforming, and provides a solid surface for a knurled grip pattern. Avoid canvas, nylon straps, and plastic handles for serious off-road use.

Can I install a grab handle on my roll bar without drilling?

Yes. Clamp-based mounting systems like the ones used by TKO attach directly to the roll bar using heavy-duty hinges, clamps, and rubber liners. No drilling is required. This preserves the structural integrity of your roll cage and allows you to reposition or remove the handle at any time. Drilling into a roll bar can weaken it and is generally not recommended.

What roll bar sizes does the TKO Grab Handle fit?

The TKO Roll Bar Mounted Grab Handle fits roll bars from 1.5 inches to 2 inches in diameter. It comes with two TKO Hinged HD clamps and four rubber liners in two sizes. Clamp #3 fits bars at 1.5 inches and 1.625 inches metal to metal. Clamp #4 fits bars at 1.75 inches and 2 inches, metal to metal. This covers the vast majority of side-by-sides, UTVs, ATVs, and Jeeps on the market today.